Wet & Forget (Australia) Pty Ltd

'Meridian Building'

C4/15 Narabang Way

Belrose NSW 2085

Wet & Forget (Australia) Pty Ltd

'Meridian Building'

C4/15 Narabang Way

Belrose NSW 2085

How to Clean Your Pavers, Concrete & Sandstone

 
by using either Wet & Forget® or Rapid Application® 

 

clean up bricks with Rapid Application

IMPORTANT:

You cannot use regular Wet & Forget 5L (blue) with the Rapid Application Sniper Nozzle. It will NOT work!

  • The active ingredients are the same but the dilutions are different.
  • Coverage of 100-300 sq metres is exactly the same for both products.
  • Common coverage is about 100-150 sq metres when used on ‘absorbent’ porous surfaces.

 

Clean Your Pavers, Concrete & Sandstone with Rapid Application® 

  1.  Attach your hose, turn to ON and off you go!
  2.  No mixing! No measuring! No mess!
  3.  Choose a cool, dry day to apply it.
  4.  Saturate the dry surface you are cleaning with the Rapid Application®.
  5.  NO rain for the first 6 hours - Then, just watch the surface come clean over time.
  6.  Only one application! (except in extreme cases of heavy contamination).

                         Clean Your Bricks and pavers with Rapid Application  

          

Clean Your Pavers, Concrete & Sandstone with Wet & Forget®

  1.  Dilute 1:5 (1 part Wet & Forget to 5 parts water) in your garden sprayer. Choose a cool, dry day to apply it.
  2.  Saturate the dry surface you are cleaning with the diluted Wet & Forget.
  3.  No rain for the first 6 hours - Then, just watch the surface come clean over time.
  4.  Only one application! (except in extreme cases of heavy contamination).
  5.  You can use it safely on ANY exterior surface because there is NO BLEACH in our product.
  6.  NO BLEACH means an unlimited shelf life.
  7.  Contains a special surfactant to give a more even dispersal. It also helps the product grip onto vertical surfaces.

                        Clean up your bricks, pavers & concrete with Wet & Forget

    Clean up your bricks ,pavers & concrete
Helpful Hints:

  • Total saturation of the surface with this product is essential in order to obtain a good kill of the moss, mould, lichen, algae and fungi.
  • Make sure the surface is dry in order to get the best penetration of the growth with the least amount of evaporation.
  • If the surface is particularly bad, do a second application, approximately one month after the first application.
  • After the initial application use as a maintenance tool. Only re-apply at the first sign of regrowth.